|
 Package
2110 Control converts
mechanically actuated press brakes to electrical foot switch
operation and gives the press brake single forming speed when
used as a mechanical power press for punching, piercing, notching
or blanking operations. The control incorporates single stroke
function with Select-O-Stop and utilizes an electric foot switch
for machine actuation. Meets OSHA standards for control reliability
& component monitoring and also incorporates brake monitoring.
Includes the
following components
 No. UL-102 UltraTouch Modules (optional) |
 No. 300 Calibrated Switch Actuator (Activates
Select-O-Stop) |
 No. 301 Limit Switches (four) |
 No. 302 Guarded Foot Switch |
 No. 303 Dual Solenoid Valve with Muffler |
 No. 304 Air Cylinder Assembly |
 No. 306 Heavy Duty Pressure Switch |
 No. 311 Filter, Regulator, Lubricator |
A proper point of operation guarding
device is required when using the electric foot switch as the
activating device. Refer to SuperLight
VI Programmable Safety Light Curtain for proper guarding
device specification.
Operational
Description
Package 2110 allows the
press brake to be operated as a partial revolution punch press.
The controls meet all current standards for control reliability
and component monitoring and also incorporates brake monitoring.
The normal operating procedure is the same as a partial revolution
punch press.
- Operator inserts workpiece into
the die area.
- Operator clears body parts from
hazardous zone.
- Operator initiates the ram cycle.
- Ram cycles and stops at top
stop.
- Operator then removes workpiece
from die area.
Automatic
Ram Cycling and Indexing Options
Auto Cycle.
All systems are designed
for single stroke only. Auto Cycle allows the press to continue
past top stop as long as the operator has maintained foot pedal
contact, and stop at the Select-O-Stop position. Auto-Cycle may
only be used with a light guard, which will prevent the press
from continuing past top stop, if the operator has his/her hand
in the die area when the press reaches top stroke. Excellent
for the production of small parts and workpieces with flanges.
Auto Return.
Press will automatically
return to top of stroke after piece part has been formed (requires
additional limit switch). This feature enhances ram cycling.
|
