ISO & IEC Standards

MIL-STD-882D (2000). Standard practice for system safety. Department of Defense, U.S.A.
EN 563:1994 Safety of machinery – Temperatures of touchable surfaces – Ergonomics data to establish temperature limit values for hot surfaces

IEC 60204-1 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 60825-1 Safety of laser products - Part 1: Equipment classification, requirements and user's guide
IEC 61000-6 Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 4: Emission standard for industrial environments
IEC 61496-1 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and test
IEC 61496-2 Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
IEC 61508-1 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements
IEC 62061 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
IEC 61508-3 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements
IEC 62061 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems

ISO 13849-1 Safety of machinery -- Safety-related parts of control systems -- Part 1: General principles for design
ISO 13849-100 Safety of machinery -- Safety-related parts of control systems -- Part 100: Guidelines for the use and application of ISO 13849
ISO 13849-2 Safety of machinery -- Safety-related parts of control systems -- Part 2: Validation
ISO 13850 Safety of machinery -- Emergency stop -- Principles for design
ISO 13852 Safety of machinery -- Safety distances to prevent danger zones being reached by the upper limb
ISO 13853 Safety of machinery -- Safety distances to prevent danger zones being reached by the lower limbs
ISO 13855 Safety of machinery -- Positioning of protective equipment with respect to the approach speeds of parts of the human body
ISO 13856-1 Safety of machinery -- Pressure-sensitive protective devices -- Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
ISO 14118:2000 Safety of machinery -- Prevention of unexpected start-up
ISO 14119 Safety of machinery -- Interlocking devices associated with guards -- Principles for design and selection
ISO 14120 Safety of machinery -- Guards -- General requirements for the design and construction of fixed and movable guards
ISO 14159 Safety of machinery -- Hygiene requirements for the design of machinery
ISO 13732-3 Ergonomics of the thermal environment - Touching of cold surfaces Part 3: Ergonomics data and guidance for application
ISO 4413 Hydraulic fluid power – General rules related to systems
ISO 4414 Pneumatic fluid power – General rules related to systems
ISO 21469 Safety of machinery -- Lubricants with incidental product contact -- Hygiene requirements

NOTE: Standards listed here and referenced on triadcontrols.com are subject to frequent change and revision by their issuing organizations. Check with OSHA and ANSI for the most recent standards for your application.