|
 The
"Floating Blank" option provides the flexibility necessary
to effectively guard all types of equipment that require multiple
floating beams. This is quite common in the fabricating industry
where the workpiece moves.
The "Floating Blank"
permits work pieces to be formed vertically or horizontally through
the guarded area without shutting down the machine. Entry into
the protected area by the operator or passerby will prevent the
start or, if the machine is in motion, will provide a signal
to stop the machine.
The "Floating Blank"
is controlled by a keyed selector switch that will allow a work
opening of 8 cm based on 2 cm increments (shown above). Blanking
adjustments required when die heights change are not necessary.
The "Floating Blank" light curtain automatically adjusts
to the various feed positions providing protection with production.
The "Floating Blank"
(8K) Option includes:
- 2 CM - Constant scan light curtain
- 4 CM - One floating beam
- 6 CM - Two floating beams
- 8 CM - Three floating beams
|
